Search results

Presents a finite‐difference solution to transient free convection flow past a semi‐infinite vertical plate in which the plate temperature T¢_w(x) varies as the power of the axial co‐ordinate in the form T¢_• + axⁿ. Gives numerical results for fluids with Prandtl numbers Pr = 0.7 (air) and Pr = 7 (water) for three representative exponent values under non‐uniform surface heating conditions. Finds that the time to reach the steady‐state increases as the value of n or Pr increases. The steady‐state local skin‐friction falls by increasing the exponent n and Pr; however, the steady‐state local Nusselt number increases with n at a distance along the plate far away from the leading edge but decreases with increasing n near the leading edge of the plate. Also, the average Nusselt number increases and the average skin‐friction decreases as n increases because of enhanced heating of the plate.

Free convection heat transfer due to the simultaneous action of buoyancy, radiation and transverse magnetic field is investigated for a semi‐infinite vertical plate. Solutions are derived by expanding the stream function and the temperature into a series in terms of the parameter ζ = x^1/2 L^–1/2, where L is the length of the plate. Velocity and temperature functions are shown on graphs and the numerical values of functions affecting the shear stress and the rate of heat transfer are entered in a table. The effects of the magnetic field parameter λ and the radiation parameter F on these functions are discussed.

Numerical results generated by a highly efficient finite‐difference method (originated by Keller for aerodynamical flows at the California Institute of Technology in 1970), and a robust double shooting Runge‐Kutta‐Merson scheme are presented for the boundary layer equations representing the convection flow of a viscous incompressible fluid past a hot vertical flat plate embedded in a non‐Darcy porous medium. Viscous dissipation due to mechanical work is included in the temperature field equation. The computations for both solution techniques are compared at the leading edge (ξ = 0.0) and found to be in excellent agreement. The effects of the viscous heating parameter (Ec), thermal conductivity ratio (λ) and a Darcy porous parameter (Re/GrDa) on the fluid velocities, temperatures, local shear stress and wall heat transfer rate are discussed with applications to geothermal and industrial flows.

The purpose of this paper is to conduct a theoretical study on steady fully developed non-linear natural convection and mass transfer flow past an infinite vertical moving porous plate with chemical reaction and thermal diffusion effect. Closed-form expressions for dimensionless velocity, concentration, Sherwood number and skin-friction are obtained by solving the present mathematical model.

The fully developed steady non-linear natural convection and mass transfer flow near a vertical moving porous plate with chemical reaction and thermal diffusion effect is investigated. The non-linear density variation and Soret effect were taken into consideration. The dimensionless velocity, temperature and concentration profiles were obtained in terms of exponential functions, and were used to compute the governing parameters, skin-friction and Sherwood number.

The effect of coefficient of the non-linear density variation with the temperature (NDT) and concentration (NDC) parameter, chemical reaction parameter, thermal diffusion parameter are discussed with the aid of line graphs and tables. The analysis of the result shows that the velocity as well as skin-friction having higher values in the case of non-linear variation of density with temperature and concentration in comparison to linear variation of density with temperature and concentration. It is observed that the velocity and skin-friction increase with an increase in the Soret parameter.

The aim of this paper is to extend the work of Muthucumaraswamy (2002) by incorporating the thermal diffusion (Soret) effect and non-linear density variation with temperature (NDT) and concentration (NDC), on which, to the best knowledge of the authors, no studies have been carried out.

The purpose of this paper is to consider steady two‐dimensional mixed convection flow along a vertical semi‐infinite power‐law stretching sheet. The velocity and temperature of the sheet are assumed to vary in a power‐law form.

The problem is formulated in terms of non‐similar equations. These equations are solved numerically by an efficient implicit, iterative, finite‐difference method in combination with a quasi‐linearization technique.

It was found that the skin‐friction coefficient increased with the ratio of free‐stream velocity to the composite reference velocity and the buoyancy parameter while it decreased with exponent parameter. The heat transfer rate increased with the Prandtl number, buoyancy parameter and the exponent parameter.

A very useful source of information for researchers on the subject of convective flow over stretching sheets.

This paper illustrates mixed convective flow over a power‐law stretched surface with variable wall temperature.

The purpose of this paper is to study the effects of surface mass transfer on the steady mixed convection flow from a vertical stretching sheet in a parallel free stream with variable wall temperature and concentration.

An implicit finite difference scheme in combination with the quasilinearisation technique is employed to obtain non‐similar solutions of the governing boundary layer equations for momentum, temperature and concentration fields.

The numerical results are reported here to display the effects of mixed convection parameter, ratio of buoyancy forces, surface mass transfer (suction and injection), the ratio of free stream velocity to the composite reference velocity, Prandtl number and Schmidt number on velocity, temperature and concentration profiles as well as on skin friction, Nusselt number and Sherwood number.

Thermophysical properties of the fluid in the flow model are assumed to be constant except the density variations causing a body force term in the momentum equation. The Boussinesq approximation is invoked for the fluid properties to relate density changes, and to couple in this way the temperature and concentration fields to the flow field. The concentration of diffusing species is assumed to be very small in comparison with other chemical species far away from the surface. Hence the Soret and Dufour effects are neglected. The stretching sheet is assumed to be subject to a power‐law wall temperature as well as to a power‐law wall concentration, in a parallel free stream.

Convective heat and mass transfer over a vertical stretching sheet in a parallel stream is very important for various design of technological process are hot rolling, wire drawing, glass‐fiber paper production, both metal and polymer sheets, for instance, in cooling of an infinite metallic plate in a cooling bath, the boundary layer along material handling conveyors, etc.

The paper studies the combined effects of thermal and mass diffusion over a vertical stretching sheet with surface mass transfer.

The purpose of this paper is to deal with the study of free convection magnetohydrodynamic (MHD) boundary layer flow of an incompressible viscoelastic fluid along an inclined moving plate and heat transfer characteristics with prescribed quadratic power-law surface temperature.

The governing partial differential equations are transformed into non-dimensional, non-linear coupled ordinary differential equations which are solved numerically by robust Galerkin finite element method.

Numerical results for the dimensionless velocity and temperature profiles are displayed graphically for various physical parameters such as viscoelasticity, Prandtl number, angle of inclination parameter, magnetic and buoyancy parameter. The local Nusselt number is found to be the decreasing function of magnetic field parameter whereas it increases with increasing values of Prandtl number, viscoelastic parameter and buoyancy parameter.

The present problem finds significant applications in MHD power generators, cooling of nuclear reactors, thin film solar energy collector devices.

The objective of this work is to analyze the heat transfer of convective MHD viscoelastic fluid along a moving inclined plate with quadratic power law surface temperature. An extensively validated, highly efficient, variation finite element code is used to study this problem. The results are validated and demonstrated graphically.

Physical properties of a viscous fluid, e.g. viscosity and thermal conductivity change with temperature and in most of the studies concerned with natural convection, generally, the simultaneous effect of temperature dependent viscosity, thermal conductivity have been neglected. Hence, the purpose of this paper is to investigate the simultaneous effects of varying viscosity and thermal conductivity on free convection flow of a viscous incompressible electrically conducting fluid and heat transfer along an isothermal vertical non‐conducting plate in the presence of exponentially varying internal heat‐generation and uniform transverse magnetic field.

The governing equations of motion and energy are transformed into ordinary differential equations using similarity transformation. The resulting boundary valued, coupled and non‐linear differential equations are converted into system of linear differential equations and solved using Runge‐Kutta fourth order technique along with shooting method.

It was found that: fluid velocity decreases with the increase in magnetic parameter or Prandtl number; fluid temperature increases with the increase in magnetic parameter; velocity and temperature profiles increase due to increase in heat generation parameter; varying viscosity and thermal conductivity modifies the flow and heat transfer characteristic; and skin‐friction and heat transfer are affected by simultaneous change in viscosity and thermal conductivity in presence/absence of exponentially varying heat generation.

The present study is applicable to an incompressible viscous fluid flow and heat transfer with linearly varying viscosity and thermal conductivity.

This paper provides useful information on the physical properties of a viscous fluid with regard to viscosity and thermal conductivity change with temperature.

The purpose of this paper is to conduct a detailed investigation of the two-dimensional natural convection flow of a dusty fluid. Therefore, the incompressible boundary layer flow of a two-phase particulate suspension is investigated numerically over a semi-infinite vertical flat plate. Comprehensive flow formations of the gas and particle phases are given in the boundary layer region. Primitive variable formulation is employed to convert the nondimensional governing equations into the non-conserved form. Three important two-phase mechanisms are discussed, namely, water-metal mixture, oil-metal mixture and air-metal mixture.

The full coupled nonlinear system of equations is solved using implicit two point finite difference method along the whole length of the plate.

The authors have presented numerical solution of the dusty boundary layer problem. Solutions obtained are depicted through the characteristic quantities, such as, wall shear stress coefficient, wall heat transfer coefficient, velocity distribution and temperature distribution for both phases. Results are interpreted for wide range of Prandtl number Pr (0.005-1,000.0). It is observed that thin boundary layer structures can be formed when mass concentration parameter or Prandtl number (e.g. oil-metal particle mixture) are high.

The results of the study may be of some interest to the researchers of the field of chemical engineers.

The purpose of this paper is to examine the effects of Darcian drag force and radiation-conduction on unsteady two-dimensional magnetohydrodynamic flow of viscous, electrically conducting and Newtonian fluid over a vertical plate adjacent to a Darcian regime in presence of thermal radiation and transversal magnetic field. A well-tested, numerically stable Crank-Nicolson finite-difference procedure is employed for the conservation equations. Excellent agreement is obtained for numerical solutions with previously published work.

In this investigation, an efficient, accurate, extensively validated and unconditionally stable finite-difference scheme based on the Crank-Nicolson model is developed to solve the governing coupled, non-linear partial differential equations. The accuracy and effectiveness of the method are demonstrated.

Different numerical results are obtained and presented graphically to explain the effect of various physical parameters on the velocity and temperature profiles, local, as well as average, skin friction and Nusselt number. It is found that, with a rise in Darcian drag force, flow velocity and temperature are reduced, but increased for all times. Both average and local skin frictions are reduced considerably with an increase in Darcian drag force, but reversed behavior is observed for the local Nusselt number. Increasing the thermal radiation effects accelerated the flow velocity as well as the fluid temperature and wall local skin friction in a saturated porous medium, but effectively reduced the local Nusselt number and average Nusselt number at the wall. Comparison with previously published works in the limits shows excellent agreement.

The analysis is valid for unsteady, two-dimensional laminar flow of an optically thick no-gray gas, electrically conducting, and Newtonian fluid past an isothermal vertical surface adjacent to the Darcian regime with variable surface temperature. An extension to three-dimensional flow case is left for future work.

Practical interest of such study includes applications in electromagnetic lubrication, boundary cooling, bio-physical systems and in many branches of engineering and science. It is well known that the effect of thermal radiation is important in space technology and high temperature processes. Thermal radiation also plays an important role in controlling heat transfer process in polymer processing industry.